|
|
Post by thinkcure54 on Sept 24, 2014 23:50:07 GMT -6
Yea my cell had the same problem it could hold poses but it was still very loose but i put a tiny bit of super glue on all the ball pegs and now its perfect! But perfect cell can never be "perfect"... Xp JK |
|
|
|
Post by gotenks on Sept 27, 2014 4:16:47 GMT -6
I didn't wanted to open a new thread, so I'll post it here - My goku has a little problems. the first one is a little black dot near the mouth on the smiley face - Picture Here. (the picture are not really good, but you can still see it) the next one is the shoulders, that has a blue mark on them, I think its from the sleeves, but Im not sure - first picture, second picure. (again, the pictures aren't in good quality) What should I do? |
|
|
|
Post by gotenks on Sept 29, 2014 12:11:18 GMT -6
any help?? ^
|
|
|
|
Post by Branjita on Sept 29, 2014 12:44:24 GMT -6
Pics don't work
|
|
|
|
Post by gotenks on Sept 29, 2014 13:13:28 GMT -6
|
|
|
|
Post by Branjita on Sept 29, 2014 13:29:11 GMT -6
Well, you could try using a soft sponge and some soap and water to get the blue off. If that doesn't work, you could try using a dry piece of white printer paper and polishing the marks off. It may or may not work, but it will be gentler than sand paper and regular printer paper does have a bit of sanding power. The dot isn't worth messing with particularly, because removing it will likely cause an even more noticeable problem. A little scrape with a screwdriver might take it off... or the entire mouth  |
|
|
|
Post by gotenks on Sept 29, 2014 13:33:33 GMT -6
Well, you could try using a soft sponge and some soap and water to get the blue off. If that doesn't work, you could try using a dry piece of white printer paper and polishing the marks off. It may or may not work, but it will be gentler than sand paper and regular printer paper does have a bit of sanding power. The dot isn't worth messing with particularly, because removing it will likely cause an even more noticeable problem. A little scrape with a screwdriver might take it off... or the entire mouth If I'll use soap and water, or even a printer paper, it won't get the arm's color off, right? |
|
|
|
Post by Branjita on Sept 29, 2014 13:36:03 GMT -6
The soap and water shouldn't, but the paper might. You can't just rub it all willy nilly.  |
|
|
|
Post by gotenks on Sept 29, 2014 14:01:03 GMT -6
The soap and water shouldn't, but the paper might. You can't just rub it all willy nilly. I did what you said and it did came off, theres just a little that didn't. but I think I live with it, I don't want to make it worse. Thanks!  |
|
|
|
Post by ssHiep on Oct 4, 2014 21:36:46 GMT -6
So I finally opened my SSJ Goku only to have his right bicep fall off and it won't go back in, sigh
|
|
|
|
Post by angelo2113 on Oct 5, 2014 1:30:36 GMT -6
So I finally opened my SSJ Goku only to have his right bicep fall off and it won't go back in, sigh I believe most of them have that problem. Mine does, too. There's a "How To" post awhile back that gives you some ideas on what to do. |
|
Gonstead
Rank: Super Mod 
／人◕‿‿◕人＼
Posts: 2,589
Species: Android
|
Post by Gonstead on Oct 5, 2014 3:17:20 GMT -6
Mine doesn't have that issue. All the complaints people have had with their figures I don't have on mine except for Saiyan Vegeta, since that was a common issue.
|
|
|
|
Post by ssHiep on Oct 5, 2014 8:05:52 GMT -6
So I finally opened my SSJ Goku only to have his right bicep fall off and it won't go back in, sigh I believe most of them have that problem. Mine does, too. There's a "How To" post awhile back that gives you some ideas on what to do. I managed to get it back on by pulling the shoulder back. Hopefully it'll stay for a while |
|
|
|
Post by rampage on Oct 5, 2014 17:34:53 GMT -6
After reading this topic I'm shocked to say I'm one of the people who got a saiyan saga vegeta with no obvious flaws. If I'm too rough his torso will pop off; perhaps his legs as well. But he stands perfectly and they're stiff for posing. His scouter stays in decently well too. I had more issues with Frieza than vegeta. One of my frieza's legs are horrible.  |
|
|
|
Post by gotenks on Oct 13, 2014 10:50:19 GMT -6
I just got 18 & Krillin, 18 is perfect, but I got few problems with krillin -
the first time I putted the Destructo Disk the peg that connect the little stick and the Disk itself broke and got stuck inside the Disk.
the seconed problem is, the hand peg that connects to the hands on the right arm is too loose, when I put any hand, its just fall of. I tried to push a lttle hard, but I aint no hearing any 'click' sound, and I don't want to break it. I think to contect the seller about that.
|
|
