|
|
Post by gotenks on Sept 20, 2015 0:07:03 GMT -6
Many people complain that piccolos head is annoying to put on when he has the cape on, I just dont have that issue its really easy Agreed, it's easy for me too. |
|
|
|
Post by Deleted on Sept 20, 2015 22:19:57 GMT -6
Hey guys! Any advice on how to tighten up Vegeta's legs? I tried the Pledge floor cleaner technique to create more friction, but didn't work even after three layers. What did you guys try?
|
|
|
|
Post by blank on Sept 21, 2015 2:36:15 GMT -6
Hey guys! Any advice on how to tighten up Vegeta's legs? I tried the Pledge floor cleaner technique to create more friction, but didn't work even after three layers. What did you guys try? That Pledge technique is the stupidest and worthless, not surprised that it didn't work for you. |
|
|
|
Post by timone317 on Sept 21, 2015 12:21:57 GMT -6
Hey guys! Any advice on how to tighten up Vegeta's legs? I tried the Pledge floor cleaner technique to create more friction, but didn't work even after three layers. What did you guys try? Could you elaborate on how you added the Pledge? Did you remove the thigh socket from the waist peg and then apply the Pledge to the socket or did you dip it right in without removing the socket? Also how long did you let it sit before moving the leg? |
|
|
|
Post by Deleted on Sept 21, 2015 14:34:45 GMT -6
Hey guys! Any advice on how to tighten up Vegeta's legs? I tried the Pledge floor cleaner technique to create more friction, but didn't work even after three layers. What did you guys try? Could you elaborate on how you added the Pledge? Did you remove the thigh socket from the waist peg and then apply the Pledge to the socket or did you dip it right in without removing the socket? Also how long did you let it sit before moving the leg? Hey man, I removed the actual leg each time and applied the Pledge both in the leg socket and actual ball peg. I then attached them, and waited 24 hours. Idk if the different pledges have different consistency, all I know is that the bottle was not exactly the same as I saw some Youtubers use. However, it seems to be made of the same ingredients. |
|
|
|
Post by timone317 on Sept 21, 2015 15:16:10 GMT -6
you might try something else. I had some luck with Testors Dullcote Lacquer.  I took some of this and applied it to the thigh sockets on a Vegeta and an SDCC Gohan. I let it sit for over 24 hours, applied another coat, and then let that sit for 24 hours...then I gave it another 24 hours just to be perfectly safe (bothersome since I was anxious to see the results but it was worth it). I knew it had worked almost immediately because the sockets were difficult to pop back onto the ball pegs. Granted it isn't absolutely perfect as friction is bound to remove some of the lacquer and it leaves behind a noticeable white residue on the sockets but the joints are much tighter and I was happy with the results. |
|
|
|
Post by blank on Sept 21, 2015 19:11:31 GMT -6
you might try something else. I had some luck with Testors Dullcote Lacquer. I took some of this and applied it to the thigh sockets on a Vegeta and an SDCC Gohan. I let it sit for over 24 hours, applied another coat, and then let that sit for 24 hours...then I gave it another 24 hours just to be perfectly safe (bothersome since I was anxious to see the results but it was worth it). I knew it had worked almost immediately because the sockets were difficult to pop back onto the ball pegs. Granted it isn't absolutely perfect as friction is bound to remove some of the lacquer and it leaves behind a noticeable white residue on the sockets but the joints are much tighter and I was happy with the results. *face palm* OMG. |
|
|
|
Post by silvershadow206 on Sept 22, 2015 11:16:17 GMT -6
I had an issue with 18 having a bit of lose leg syndrome
|
|
|
|
Post by axelrules on Jan 5, 2016 2:58:45 GMT -6
There is a better way to fix vegetas leg issue and its not expensive at all, rather its just simple. You can just put a tiny piece of paper that cover the ball joint, you can color it if it bothers you, and then just snap the leg back into place. I did this with one of my figures and it worked.
|
|
|
|
Post by justinsanity663 on Jan 25, 2016 4:08:07 GMT -6
Any tips on getting the ssj3 Goku head to not floo around in a SS Goku body?
|
|
|
|
Post by Bardoon on Jan 28, 2016 13:12:56 GMT -6
Anybody update this with known Super Warrior Awakening Goku issues?
Here's what I've heard:
-Loose right shoulder
-Right (figure's right) boot aligned improperly during manufacturer
-Various minor paint flaws (such as sloppy paints on wrist-wraps and boot ropes)
|
|
|
|
Post by wiizardii01 on Jan 28, 2016 14:58:56 GMT -6
Anybody update this with known Super Warrior Awakening Goku issues? Here's what I've heard: -Loose right shoulder
-Right (figure's right) boot aligned improperly during manufacturer
-Various minor paint flaws (such as sloppy paints on wrist-wraps and boot ropes)
Huh weird. I haven't found those problems on mine. |
|
|
|
Post by axelrules on Jan 28, 2016 15:23:57 GMT -6
Same ^
|
|
|
|
Post by Bardoon on Jan 29, 2016 19:22:53 GMT -6
The loose shoulder is someone else's I've seen. And I've seen various sloppy paint on the wrists and ropes...it's very minor but it's there.
Yes, one of my SWA Goku's boots was put on improperly.
|
|
|
|
Post by blank on Jan 30, 2016 4:47:16 GMT -6
^ Same as Bardoon. Returned it, exchanged, hopefully it won't be the same for my next one!
|
|
