|
Post by balrog on Dec 28, 2019 8:36:04 GMT -6
Hey everyone! It's been a while, I've been very busy with real life stuff lately, sadly too busy to work on customs as much as I'd like, but I finally found time to finalize a project I'd had going for a while now... without further ado, I present to you : Fat Janemba. I was tired of trying to find the AB Toys version at a decent price, and the statue itself wasn't that exciting to me. So I decided to make my own using one of the iconic poses of Janemba, the Illusion Smash attack. The statue itself is made of self-hardening clay around a massive globe of styrofoam, and some of the subtler scupts are made from resin. The portals are soft plastic, silicone and paint. Here's a closer look at the portals for the Illusion Smash. As usual I hope you like it, and I wish everyone a happy holiday season. See you soon, hopefully.
|
|
|
Post by friezku on Dec 28, 2019 12:25:37 GMT -6
Hey everyone! It's been a while, I've been very busy with real life stuff lately, sadly too busy to work on customs as much as I'd like, but I finally found time to finalize a project I'd had going for a while now... without further ado, I present to you : Fat Janemba. I was tired of trying to find the AB Toys version at a decent price, and the statue itself wasn't that exciting to me. So I decided to make my own using one of the iconic poses of Janemba, the Illusion Smash attack. The statue itself is made of self-hardening clay around a massive globe of styrofoam, and some of the subtler scupts are made from resin. The portals are soft plastic, silicone and paint. Here's a closer look at the portals for the Illusion Smash. As usual I hope you like it, and I wish everyone a happy holiday season. See you soon, hopefully. balrog Cool,Dragon Ball Z: Fusion Reborn, Fat Janemba Custom.! I Like It.š
|
|
|
Post by balrog on Jan 3, 2020 9:30:12 GMT -6
Hi again everyone. Depsite having other projects on the table for quite a while, I decided to go in a completely different direction and tackled another member of Cooler's Armored Squadron : Naiz. I hope you like this one, and as always I appreciate your comments. I hope to have more customs to show you soon, take care until then.
|
|
|
Post by balrog on Jan 5, 2020 4:15:54 GMT -6
Pursuing my work in the "Movie" characters, this time I'm wrapping up the Androids movie with an Android 13 before transformation. Finding ways to craft a removable cap for him has been a headache, so I'm trying to find solutions or perhaps I'll just make a separate headsculpt entirely with a sculpted cap on... Here's a picture of the Androids together. And a larger picture of the recent changes to the "Movies" display.. it has a lot of really tall characters so it's challenging to position them correctly without hiding one another but I'm slowly getting there.. As always, I hope you like this one too, and your comments are always appreciated. Take care everyone!
|
|
|
Post by balrog on Jan 7, 2020 13:13:02 GMT -6
Hi again, folks! Just a quick update to my Android 13 (normal form), I made him a removable cap, it felt kind of odd having him without one. And finally, Bojack's team of henchmen is complete, with Bido's arrival. Here's a couple pictures of the big boy and then the whole gang together. I'm still pondering whether or not I'll make a normal form Bojack but for now I need a change of scenery so I'll start working on other characters for a bit... I hope you like these, and your comments are always very appreciated. Take care everyone!
|
|
|
Post by Branjita on Jan 7, 2020 14:32:31 GMT -6
Haha! I like the creative idea for Fat Janemba!!
Neiz looks pretty good. He should be a lot bigger than that (he's one of the tallest/largest DBZ villains of them all, even bigger than Burter... or in your collection... Figuarts Broly), but that figure you used looks like a good base for the custom at this size!
I love the Android 13! For the removeable hat, you might coat his entire head in a thick layer of Vaseline and then carefully sculpt a bowl/cap on top of his head with Apoxie Sculpt. Wait for it to dry, then remove it, carve it and add the brim of the hat with fresh apoxie sculpt (or just cut some plastic and use that). Since you painted the hair/face already, you'd probably be best off just wiping the Vaseline with paper napkins to remove it. I wouldn't try washing it off with soap... the soap will likely remove your paint. I know it would remove my acrylic paint if I did that.
D'oh! I wrote my reply and now see you made him a cool hat! How did you do it?
Bido looks great! I think CMakhk and PGV might be the only other members who have the complete Bojack Crew!
|
|
|
Post by balrog on Jan 7, 2020 16:14:26 GMT -6
Haha! I like the creative idea for Fat Janemba!! Neiz looks pretty good. He should be a lot bigger than that (he's one of the tallest/largest DBZ villains of them all, even bigger than Burter... or in your collection... Figuarts Broly), but that figure you used looks like a good base for the custom at this size! I love the Android 13! For the removeable hat, you might coat his entire head in a thick layer of Vaseline and then carefully sculpt a bowl/cap on top of his head with Apoxie Sculpt. Wait for it to dry, then remove it, carve it and add the brim of the hat with fresh apoxie sculpt (or just cut some plastic and use that). Since you painted the hair/face already, you'd probably be best off just wiping the Vaseline with paper napkins to remove it. I wouldn't try washing it off with soap... the soap will likely remove your paint. I know it would remove my acrylic paint if I did that. D'oh! I wrote my reply and now see you made him a cool hat! How did you do it? Bido looks great! I think CMakhk and PGV might be the only other members who have the complete Bojack Crew! Thank you very much for the support and kind words, they are as ever a huge inspiration and drive to continue my work on customs and to improve on every project. It's been difficult to find a proper height reference for Neiz/Naiz, as often in Dragonball media. He's drawn radically different heights in different scenes or illustrations, sometimes towering over everyone else, sometimes shorter than Dore (the green one).. Since the main inspiration behind Dore's design is the Incredible Hulk (according to that film's creator), and the SHF Hulk I use is about 20cm tall, I decided to pick up a 20cm tall skinny body for Naiz so he'd be the same height as Dore. The body is from a Green Lantern figure I found on eBay quite cheap. EDIT : to illustrate the issue, here's various depictions of Neiz I could find... one he's about the same size as Dore, the other he's simply enormous. Below those two I took a screenshot of the actual fight versus Piccolo, their heads are at the same height, but Piccolo's feet only reach down to Neiz's calves, so that'd mean Neiz is about 12-15 inches taller than Piccolo. My Neiz custom is 20cm tall, SHF Piccolo is about 16cm tall (undersized really..) so that sounds as right as I could get.. it's so hard to wrap your head around DBZ inconsistent heights at times! For Android 13, I used a Figure-rise Gogeta figure and the removable cap I made from a soft plastic eyewash bottle, I simply cut it to fit, sculpted and painted around it, and it fits as snugly as possible without damaging the sculpted hair underneath. I'll probably get to finish Cooler's Armored Squadron down the line, just need to pick up another SHF Hulk, I've run out of those. For now I have a few other customs ready to get started on, I'll make sure to share them here with you all. Thanks again for the comments, they are always appreciated.
|
|
|
Post by friezku on Jan 7, 2020 16:59:49 GMT -6
Hi again, folks! Just a quick update to my Android 13 (normal form), I made him a removable cap, it felt kind of odd having him without one. And finally, Bojack's team of henchmen is complete, with Bido's arrival. Here's a couple pictures of the big boy and then the whole gang together. I'm still pondering whether or not I'll make a normal form Bojack but for now I need a change of scenery so I'll start working on other characters for a bit... I hope you like these, and your comments are always very appreciated. Take care everyone! Cool Dragon Ball customs.! I Like The Bido,. Have You Made, A Transformed Gokua Custom Yet? I Wish We Could Get An Official BojackĀ“s Gang In Dragon Ball Z Action FIgure Form One Day
|
|
|
Post by balrog on Jan 7, 2020 17:04:50 GMT -6
Cool Dragon Ball customs.! I Like The Bido,. Have You Made, A Transformed Gokua Custom Yet? I Wish We Could Get An Official BojackĀ“s Gang In Dragon Ball Z Action FIgure Form One Day
Thanks for the kind words! I've not made a transformed Gokua, I may someday for completion's sake but for now I'm happier with his clothed form because I find it a bit more interesting design-wise. I too wish that Bandai would release more movie characters or simply characters that don't get much love (Imperfect Cell, pretty please!) but that's also a big reason why I'm making these customs, I simply want the characters so much that I'll just make my own instead of waiting on Bandai.
|
|
|
Post by Branjita on Jan 8, 2020 9:18:32 GMT -6
balrog Good idea for the removable cap!! That first image of Neiz, Salza, and Doore must be some sort of Photoshop created thing by someone, because that isn't from the movie. It looks like it is based on their individual design drawings by Toriyama. Here's the files I have saved for determining the height of these 3 villains: These Toriyama drawings aren't meant to imply scaling with each other. If they were supposed to originally... well... Toei didn't follow it, because these characters appear much differently in the movie. A properly scaled Neiz would be a heck of a commitment. I can't say I'd be super willing to have him be the biggest figure in my collection either. He'd take up tons of space being about double the height of Salza, who is already approximately the size of Yamcha (taller than Goku).
|
|
|
Post by balrog on Jan 8, 2020 9:56:36 GMT -6
Thanks for all those, they'll be handy if I decide to do a Neiz 2.0 in the future, though for now I'll be tackling different projects. It's a shame heights are so inconsistent between scenes or in various sources, and yes he does look very tall in those pictures you showed but then if you compare him to Piccolo in the scene I screenshotted, the height isn't realistic anymore.. it's like Krillin on Namek all over again, where sometimes he's as tall as Bulma and sometimes he's the same height as Gohan. I'll keep an eye out for a suitable body for that Neiz though, you never know!
|
|
|
Post by balrog on Jan 28, 2020 3:43:46 GMT -6
Hi everyone! With all the excitement around the possible future release of the whole Ginyu Commando in SHF scale, I figured it was time to give my Dende a friend too, so I made a custom of Nail. I hope you like this one, your comments are always appreciated!
|
|
|
Post by balrog on Jan 28, 2020 10:33:36 GMT -6
|
|
|
Post by friezku on Jan 28, 2020 17:23:23 GMT -6
Here's also a picture of my updated Namek display, I've moved a few things around, trying to make more space for the upcoming releases and some more customs of Frieza Force down the line... Also made a quick custom of Buu saga Gohan without his green tunic, to join my Z Sword Gohan and Mystic Gohan figures, now I have all the Gohan outfits from that saga. Ā Ā Cool.!
|
|
|
Post by tabuuforteakugun on Jan 28, 2020 20:59:23 GMT -6
Loving the display as well, nice!
|
|