|
|
Post by Marvelous Mark on Oct 22, 2013 0:57:12 GMT -6
That custom Hildegarn looks freakin awesome!
I'd have to go with an Oozaru sized Hildegarn as well. Maybe an Oozaru sized Bio Broly or Meta Cooler's huge true form as well.
All three would be movie bosses, so I guess that's a theme. A couple smaller characters from each movie could be made for smaller prizes. Tapion and Minoshiya for Hildegarn, Gohan and Goten w/Trunks... ok, so 3 for Bio Broly. And Goku and Vegeta for Meta Cooler.
A replica of the ocarina in Hildegarn's movie. I can't think of any other incidental items.
|
|
|
|
Post by Deleted on Oct 25, 2013 6:08:15 GMT -6
Those are the items that i would want for my collection that i had in mind when making this, not really a theme going on here but oh well.. Prize 1- Mecha of Dr. Wheelo 8" tall  Prize 2- Oozaru Goku destroying Pilaf castle diorama 12" tall  Prize 3- Oozaru Bardock with his crew in the backround diorama 12" tall  Prize 3,4 - King Cold sitting on his throne, basically a scaled down version of the tokyo festival statue. 4" tall Nameless Namek's Spaceship 5" tall   Prize 6- set of minifiguers of Turles crusher corps, similar to the sets of frieza forms and androids from previous waves.  Other small items- Set of snow globes representing locations from the Dragonball universe Set of Dragonball lighters   |
|
|
|
Post by doraemonizuka on Oct 26, 2013 23:20:22 GMT -6
for me, this should be a line up prize 1 = king yemma with gokou and kami (12")  prize 2 = janemba (16")  prize 3 = dino chasing gohan (10")  prize 4 = bear thief with gokou (9")  |
|
|
|
Post by gapudo on Oct 27, 2013 2:54:34 GMT -6
Dino chasing young Chi-Chi would be better
|
|
|
|
Post by Deleted on Oct 27, 2013 5:17:39 GMT -6
|
|
havok
Rank: Frieza's Elite
Over 9000
Posts: 427
Species: Human
|
Post by havok on Apr 8, 2014 22:59:54 GMT -6
Guys, do you know if it is possible to remove the Oozaru Vegeta from his base?  |
|
Capsule x Nike
Rank: Admin 
(Dragon) Ballin' so hard mothafuka's wanna find me.
Posts: 725
Species: Saiyan
|
Post by Capsule x Nike on Apr 8, 2014 23:10:38 GMT -6
It is possible havoc , I believe adrenaline did his. You technically have to break the figure to remove it though, it's not actually meant to be removed. It does look pretty cool off the stand though.
|
|
|
|
Post by Gohan on Apr 8, 2014 23:13:04 GMT -6
iami2eapei2 did it but not sure how, hopefully he notices I tag him or someone else answers you.
|
|
|
|
Post by takezo on Apr 9, 2014 4:55:44 GMT -6
|
|
|
|
Post by Adrenaline on Apr 9, 2014 8:11:11 GMT -6
I was fortunate enough to get the Vegeta Oozaru off his base without breaking anything. The only thing you may have to overcome is that the Oozaru may begin to split down the side of his boot where the figure was originally conjoined. It didn't split on mine, but I could tell it was going to start if I had not noticed it and found a way to pull it off by bending it both ways, rather than one. Also, the top might come off at the waist, (which was glued anyway, so I re-glued it) and some of the clearish dust swirls might come unglued too. No biggie. May seem like a hassle, but afterwards, everything was re-glued (which was originally glued anyway) and I sold the base to sparky.
As for my dream kuji, Yemma. I am very surprised they haven't made him yet, sitting at his desk.
|
|
havok
Rank: Frieza's Elite
Over 9000
Posts: 427
Species: Human
|
Post by havok on Apr 9, 2014 11:06:11 GMT -6
I was fortunate enough to get the Vegeta Oozaru off his base without breaking anything. The only thing you may have to overcome is that the Oozaru may begin to split down the side of his boot where the figure was originally conjoined. It didn't split on mine, but I could tell it was going to start if I had not noticed it and found a way to pull it off by bending it both ways, rather than one. Also, the top might come off at the waist, (which was glued anyway, so I re-glued it) and some of the clearish dust swirls might come unglued too. No biggie. May seem like a hassle, but afterwards, everything was re-glued (which was originally glued anyway) and I sold the base to sparky. As for my dream kuji, Yemma. I am very surprised they haven't made him yet, sitting at his desk. Thanks. Did you use a tool (knife, etc) to get the Oozaru off his base or it is possible to do it without any tools? I had a bad time removing the pegs from Frieza HQ DX using a kitchen knife. |
|
|
|
Post by Branjita on Apr 9, 2014 13:16:06 GMT -6
For the Frieza you should use an x-acto knife, preferably a medium duty blade.
It will probably help you remove the base if you use a hair dryer to heat up the area you are trying to separate on the Oozaru.
|
|
Capsule x Nike
Rank: Admin
(Dragon) Ballin' so hard mothafuka's wanna find me.
Posts: 725
Species: Saiyan
|
Post by Capsule x Nike on Apr 9, 2014 13:35:43 GMT -6
For the Frieza you should use an x-acto knife, preferably a medium duty blade. It will probably help you remove the base if you use a hair dryer to heat up the area you are trying to separate on the Oozaru.  DO NOT DO THE HAIR DRYER THING. That oozaru is made of vinyl.... Any exposure to extreme heat or light and in a few months it will be "sweating" and cracking. Don't do that... Find another way. |
|
|
|
Post by Branjita on Apr 9, 2014 14:23:43 GMT -6
Hmm, maybe better not to do that then if you've had that experience. I haven't had that problem before, but only own a couple of things made of vinyl. Is the base made of plastic, or vinyl? Hair dryers top out at around 140 degrees. Boiling water is about 212 degrees minimum. I'm not a scientist, but I'd say the dry heat is more damaging to the surface and know it's far less effective at penetrating/heating everything. However, using boiling water on something that big is problematic and vinyl is super hollow normally and boiling vinyl stuff is not the best idea because it could deform it since it could be very hollow.  |
|
|
|
Post by CyHi on Apr 9, 2014 15:02:30 GMT -6
In my experience of repairing iPads, indirect heating is always the best to prevent warping. I use this thing, you just put it in the microwave for a minute and it gets hot and melts the glue. I'm not sure how thick the base on the oozaru is or anything, just a suggestion   |
|
DO NOT DO THE HAIR DRYER THING. 
